Android studio — Your SDK location contains non-ASCII characters


Содержание

Ваш путь к проекту содержит символы, отличные от ASCII, android studio

Я устанавливал андроид-студию, но у меня есть эта проблема, когда программа запускается:

Ошибка: (1, 0). Путь к проекту содержит символы, отличные от ASCII. Эта скорее всего, приведет к сбою сборки в Windows. Пожалуйста, переместите проект в другой каталог. См. http://b.android.com/95744 для подробности.

Это предупреждение можно отключить, используя флаг командной строки -Dcom.andro в gradle.properties файл в каталоге проекта.

Я создал ссылку на символ (c:\android-sdk) в Windows 10 и разрешил:
mklink/D «c:\android-sdk» «C:\Users\Clézio\android-sdk»

У меня такая же проблема. Затем я создаю новый проект, и путь использует только английский алфавит, проблема решена.

Я встречаю эту проблему и обнаруживаю, что на моем пути есть некоторые китайские символы. После изменения этих символов на английский язык проблема решена.

В вашем пути к проекту содержатся китайские символы,

Пожалуйста, переименуйте путь к английским символам:

Я решил эту проблему, добавив эту строку

Как говорится в этом сообщении

То, что я на самом деле делал, было перенаправление (я действительно не знаю этот термин) путь к другому пользователю (мой путь был C:\Users\Keith Peñas\и т.д.), тогда я думал, что у меня есть это испанское письмо, поэтому я перенаправил путь к другому пользователю, в этом случае он был (C:\Users\Keith). Тогда у меня возникла еще одна проблема: это было похоже на «Твой путь не может быть с корнем». Поэтому я создал папку с именем моего приложения, а потом сработает!

Другая проблема, с которой я столкнулся, заключалась в следующем: «ваш путь содержит пробел и т.д.» и это было с моего другого диска.

Надеюсь, это поможет!

Если вы столкнулись с проблемой в первый раз, установив Android Studio на свой компьютер.

mklink /D «c:\Android-Sdk» «C:\Users\ **YOUR-USERNAME** \AppData\Local\Android\sdk»

Перейдите в папку «C:\Users\ YOUR-USERNAME\AppData\Local \» и создать в нем папки Android\sdk.

После этого вы можете продолжить установку.

Your SDK location contains non-ASCII characters — no Android in Tools Menu

I’ve just downloaded and installed Android Studio but there is no Android submenu in Tools menu and no AVD Manager icon on the instrument panel. When I start SDK Manager, there is an error message:

Please specify a Android SDK location

If I click on Edit link next to Android SDK Location field, there is another error message:

Your SDK location contains non-ASCII characters

I studied these somewhat similar questions, but non of them helped me:

I see that the path really contains non-ASCII characters, but is there any workaround other than uninstall Android Studio and then install it from scratch to some other directory like С:\Android\SDK?

1 answer

  • answered 2020-03-10 19:53 Sami Kuhmonen


If you don’t want to reinstall the Android SDK in another location you can also create a junction point which is a link to the actual location. You can use the junction tool to do this.

For example, you can create the directory C:\Android and then create the junction SDK and claim the SDK lives there with

The operating system will show the same contents under both paths and applications will not know the difference.

See also questions close to this topic

this is the error I get after

Currently my app takes each new score from my Quiz and stores it in a file and it is then displayed. What do I need to do if I want to only show the high scores and not each new score in the quiz?

when the game is over, the score is stored in a file as shown below:

The score is then shown on the main screen on the app via:

Цукерберг рекомендует:  Как не срывать дедлайны

I have error message (expected begin_array but was begin_object at path .data) when try to get data from JSON and I don’t know how to fix it. This link is my JSON response via postman https://pastecode.xyz/view/870b0c04

this is my model response in API package https://pastecode.xyz/view/27b5091e

FeedData is an Interface and just like this: interface FeedData, this is link for my serialization class https://pastecode.xyz/view/8cb5ef7c,

and this link is when i try to get data https://pastecode.xyz/view/5c730ff2

can anyone help me to fix this error, thanks!

Hello, everyone!

I’m currently attempting to develop a site, where everyone and anyone can see a collection of posts from all my different pages feed. I’ll have to sort them by likes and such later on, so simply using the «embed iframe» option is not a solution.

I’m having a hard time figuring out how to even get started and Facebooks developer documentation is verY unclear and extremely difficult to navigate through, despite having read a ton of documentations throughout my years in the business.

Currently, I’ve got a setup running with the PHP SDK and I’ve also created a developer application at Facebook.

What permissions and accesses do I need? I own all pages I want to fetch posts

I’m simply looking for pointers in the right direction.

I basically want a functionality for my app where I can show the user all pictures/movies in his collection within two certain dates. He should be able to look at these pictures and select one or multiple and A) Create an album out of it B) Share them Or C) (as said) just look at them

Is there any third party library that implements everything that I need? Because UIImagePickerController as far as I understand is too limited for that

Our goal here was to get every hour with a schedule the leads of our pages.

We know we have an expiration of the access_token so we puted us code who send us a mail if it happens and then we just create another access token.

But the thing is, the token we have , his Data Access Expires in 3 months , but the token is expering after even less than an hour.

Maybe we do something wrong , i will put some code , but we need an access token which gives us the possibility to get the leads of the page for minimum something like 1-2 months and then we will do it again.

We get the access token from the web , send it to the API , save it in database and then the schedule take it to got the leads.

I’m not very good at Facebook SDK so sorry if it’s obvious.

There is some code :


And then from the forms we get the leads but already at this point it’s not working.

Thank you for everything !

I am using this test link https://mozilla.github.io/pdf.js/web/viewer.html to upload a test pdf file.

The image is lost when previewing with pdfjs.

A temporary solution is to convert the file itself, convert this pdf to jpg first, and then convert this jpg to pdf.

Is it possible that the font is Chinese traditional? and how can I solve it, or can it be implemented via little code? Thanks a million!

I use rtl and ltr character since I have English with Hebrew

The problem that the fixed length is changed since I put hidden character.

Length 30 is now more because hidden rtl/ltr is turn to 32

My question is : I need to export to txt file ascii

How can I escape special characters but not remove the new direction?

I have a giant .xlsx file which contains the tweets. I am hoping to extract emojis from the tweets for some analysis.

I am new with R, and I have looked around everywhere however, I can’t seem to crack the problem. Furthermore, I have also tried to use gsub() function to have the utf-encoding that would match the encoding this emoji dictionary I have found. However gsub() can’t manipulate them.

I am still getting the utf-encoding. Thing is, in View() function, I see emojis as emojis, but in console they become emojis. And also, I can’t extract them. I would really appreciate if you help. This is personal project.

while I am downloading SDK(ANDROID STUDIO 3.5.1) to create emulator I got below error

The installation did not complete successfully, See the IDE for log details,

how to resolve this issue

I am getting this error when running Buildozer android debug

My Buildozer file looks like this

I also installed Android API Level 27 using android studio and am on Mac OS. I have seen questions similar to this posted on git hub and stack overflow but have not found a working answer.

I am trying to install intelhaxm and am getting this error:

virtualization is enabled from BIOS and hyper-V is disabled.

I am trying to run the below shell script:

I have added the ANDROID_HOME, ANDROID_AVD_HOME to my PATH (Note: I am using macos with zsh) and i have sourced the zshrc file and also restarted the terminal but keep getting the below error:

./start_emulator.sh: line 3: sdkmanager: command not found

./start_emulator.sh: line 4: avdmanager: command not found

PANIC: Unknown AVD name [ANDROID], use -list-avds to see valid list. ANDROID_AVD_HOME is defined but there is no file Android.ini in $ANDROID_AVD_HOME/.android/avd (Note: Directories are searched in the order $ANDROID_AVD_HOME, $ANDROID_SDK_HOME/avd, and $HOME/.android/avd)

I am using Windows 10. When I view the log file, the only error that I can see is:

Does anybody know what this means, or how to fix it? Any help would be greatly appreciated.


I am trying to run an android emulator on Linux mint.

Цукерберг рекомендует:  Odesk - Поделитесь опытом по oDesk

When I try to run the avd , on the emulator, I get the following error.

When I navigate to android_sdk/system-images/android-21/default/armeabi-v7a

There exists a kernel file called kernel-qemu

I guess there is some sort of compatibility issue between the emulator and my avd?

Is there a way to resolve this?

Below is the script I use to install my android tools, and create the avd.

Ваше местонахождение SDK содержит не-ASCII символы — не Android в меню Tools

Я только что скачал и установил Android Studio , но не Android подменю в Сервис меню и не AVD менеджер значок на приборной панели. При запуске SDK менеджера , появляется сообщение об ошибке:

Пожалуйста, укажите расположение Android SDK

Если я нажимаю на Edit ссылку рядом с Android SDK Location поле, есть еще одно сообщение об ошибке:

Ваше местонахождение SDK содержит не-ASCII символы

Я изучал эти несколько подобные вопросы, но не из них помог мне:

Я вижу , что путь действительно содержит не-ASCII символы, но есть ли обходной путь, кроме удаления Android Studio , а затем установить его с нуля до какого — то другого каталога , как С: \ Android \ SDK ?

При загрузке Andro >

перестать давать папкам и файлам названия с русскими буквами….
либо кинь свой SDK в корень на диске С Александр 1

Другие интересные вопросы и ответы

В приложении The Question (Andro >Юрий Дьяконов 1

Пишу с андроида и, нет, фото прикреплять возможности нет.

Увы, но, надеюсь, разработчики это исправят.

А они вообще хорошие ребята, над дизайном поработали. Молодцы.

Катерина Кривомазова 2

Привет. Ты сталкивался с загрузкой библиотек .jar или просто классов .java с сервера по http в Андроид приложении и дальнейшем их использовании?Если да, то можешь поделиться примером?

Почему возникает ошибка при авторизации через контакт?

-(<«error»:»invalid_request»,»error_description»:»Security Error»>). Юзал в гугле, там пишут цитирую, (Это администрация VK заблокировала приложение, через которое вы авторизуетесь (если я не ошибаюсь). Не волнуйся, такое частенько бывает. Скоро починят.) но прошло уже 3 дня и все еще та же самая проблема, подскажите что делать?

Ошибка авторизации через Вконтакте на любом сайте возникает из-за того, что были удалены некоторые временные файлы с вашего компьютера, например, вы воспользовались программой Ccleaner. Чтобы исправить ошибку авторизации errors invalid или как полностью она пишется:

Необходимо находясь в своем аккаунте Вконтакте нажать кнопку «выход». Затем снова зайти на свою страницу, заново набрав логин и пароль. Теперь кнопка авторизации везде заработает.

При загрузке Andro >При загрузке Android studio пишет ,,Your SDK location contains non-ASCII characters» — что делать? Guest 3


Проверь путь до папки с Android SDK (Может там встречаются какие-нибудь символы, которые и могут приводить к ошибке)

Как установить гугл плей в эмуляторе Andro >Egor Pobedin 7

Запустить эмулятор нужного устройства.

emulator -avd VM_NAME_HERE -partition-size 500 -no-audio -no-boot-anim

[Solución] Your SDK location contains non ASCII characters | Android Studio

Просмотров: 45 517

07 февраля 2020

dav >3 дня назад

ME SALE EL MODIFICADOR NO ES VALIDO EN EL CMD

Muchas gracias. Toma like ;)

Den Dobrodiev

I specified the path to the Temp folder and installation continued

guapisimopro

Pense que estaba en ingles xd

IceStyle

Buen vídeo bro, gracias

yvonsn

No me aparece android-sdk en el directorio de la instalación pero si aparece en el explorador de archivos

Wilmer Cedeño

Funcionó perfectamente, gracias!

Fernándo Lemus

Me sirvió, gracias.

Matias Quiñoneros

Hola, por favor. Me sucede lo mismo, sigo las instrucciones. Me crea el vinculo virtual. Y me crea una carpeta de acceso directo que puedo ver en el explorador de windows C:\android-sdk; peeeeero. Cuando el setup me pide buscar la ruta a la carpeta de SDK, no aparece el C:\android-sdk. A alguien mas le ocurrio esto? Y como lo soluciono?

Saul T. A.

para los que no les funciona en la parte de el link q paso donde dice NOMBREDUSUARIO tienen q poner su nombre con el que tienen problemas

Domingos Neto

Com este metodo a AVD não funciona, esto esta mal

Tiago Goebel


Congratulations! Thank you very much. Brazil here.

Well, tutorial-latinos save the day once again.

Braulio Muñoz Morla

Buena, Funciono bien !!

Karen Hipólito

¡Gracias! Estuve sufriendo mucho con el sdk. :c

Programist Php

No work, cretaed file no folder

ден фен

охуенно блять решил проблему установки, тупа автор даун поставил ссылку с русского канала на испанский

Alessandro Lopez

no me sirvio nada, ya llevo dias con ese problema

How To Fix Your SDK location contains non ASCII characters | Android Studio

Просмотров: 58 763

Tea gal

But My Error Just Says:
ASCII
Open File. Can You Please Help.

Poziv u Dženet.

«You do not have sufficient privilege to perform this operation.»

Playernumber303 Roblox

Екатерина Игоревна

I had a problem. The name of the user was in Russian language. That’s why the program Android Studio didn’t see it. I created folders (Android and SDK) like this C:\Android\SDK. And then found this way in the program. And after it all the installation was successful.

Bruno. Soares

THANK YOU A LOT IT REALLY FIXED MY PROBLEM, THAAAAANK YOOOOOUUU .

Нефли

don’t help, what to do?

Força e Ação Telecom

You must create the \ AppData \ Local \ Android \ sdk folders first.

Eden Tanami


«You do not have sufficient privilege to peeform this operation», what to do?

João M. Evangelista

Thanks my friend!

Николай Криволап

Paldex İnc.

thank you very much bro , this video is beatifull :)

KEN CAT

Well, I just create folders which are same as that path, and it worked. But honestly, what on earth there still have one software does not accept nonASCII characters in 2020. Bullshit AS.

How To Fix Your SDK location contains non ASCII characters | Android Studio

Просмотров: 58 763

Tea gal

But My Error Just Says:
ASCII
Open File. Can You Please Help.

Цукерберг рекомендует:  Полиморфизм - Нужна помощь теоретически и с примерами

Poziv u Dženet.

«You do not have sufficient privilege to perform this operation.»

Playernumber303 Roblox

Екатерина Игоревна

I had a problem. The name of the user was in Russian language. That’s why the program Android Studio didn’t see it. I created folders (Android and SDK) like this C:\Android\SDK. And then found this way in the program. And after it all the installation was successful.

Bruno. Soares

THANK YOU A LOT IT REALLY FIXED MY PROBLEM, THAAAAANK YOOOOOUUU .

Нефли

don’t help, what to do?

Força e Ação Telecom

You must create the \ AppData \ Local \ Android \ sdk folders first.

Eden Tanami

«You do not have sufficient privilege to peeform this operation», what to do?

João M. Evangelista

Thanks my friend!

Николай Криволап

Paldex İnc.


thank you very much bro , this video is beatifull :)

KEN CAT

Well, I just create folders which are same as that path, and it worked. But honestly, what on earth there still have one software does not accept nonASCII characters in 2020. Bullshit AS.

How To Fix Your SDK location contains non ASCII characters | Android Studio

Просмотров: 58 763

Tea gal

But My Error Just Says:
ASCII
Open File. Can You Please Help.

Poziv u Dženet.

«You do not have sufficient privilege to perform this operation.»

Playernumber303 Roblox

Екатерина Игоревна

I had a problem. The name of the user was in Russian language. That’s why the program Android Studio didn’t see it. I created folders (Android and SDK) like this C:\Android\SDK. And then found this way in the program. And after it all the installation was successful.

Bruno. Soares

THANK YOU A LOT IT REALLY FIXED MY PROBLEM, THAAAAANK YOOOOOUUU .

Нефли

don’t help, what to do?

Força e Ação Telecom

You must create the \ AppData \ Local \ Android \ sdk folders first.

Eden Tanami

«You do not have sufficient privilege to peeform this operation», what to do?

João M. Evangelista

Thanks my friend!

Николай Криволап

Paldex İnc.

thank you very much bro , this video is beatifull :)

KEN CAT

Well, I just create folders which are same as that path, and it worked. But honestly, what on earth there still have one software does not accept nonASCII characters in 2020. Bullshit AS.

How To Fix Your SDK location contains non ASCII characters | Android Studio


Command – mklink /D “C:android-sdk” “C:Usersx userAppDataLocalAndroidsdk”

In this video we will see how to fix Your SDK location contains non ASCII characters error in android studio. This error occurs due to non-english characters in system path or folder or file name with non english character like spanish,arabic,chinese and other character. Android studio saves sdk file in following system path – C:Usersx userAppDataLocalAndroidsdk
So maybe your pc/Windows name in different language or sdk path you selected has non english character, So in this video we changed android location to local disk (C:)/android-sdk. If you get these types of error when you open your project file change files name or folder name containing your project file to english characters if those are in different language. This will fix the issue(android studio installation problem. This solution will work on (Windows XP, Windows Vista,Windows 7, Windows 8, Windows 8.1,Windows 10,Windows Server includes all 32bit and 64bit Versions).

Follow these simple steps to fix android studio error Your SDK location contains non ASCII characters
1) Open Windows File Explorer
2) Open This PC(My Computer)
3) Open Local Disk(C:)
4) Open Users
5) Replace x username with your pc/Windows Username in Following Command:
mklink /D “C:android-sdk” “C:Usersx userAppDataLocalAndroidsdk”
6) Copy command
7) Go To Windows Search
8) Search cmd
9) Right Click on cmd select run as administrator
10) Press Ctrl+V(Paste Command)
11) Press Enter (You will see new android-sdk folder in (C:) Drive
12) Go To Android Studio
13) Click On Edit (Edit Option Of android sdk location)
14) Click On Directory Option
15) Select android-sdk folder we just created
16) Click OK
17) Click Next
18) Click Next
19) Click Finish
20) Click OK
Done! Problem Solved
Your SDK location contains non ASCII characters fixed

Contact Us
Facebook :
Wikipedia :
Twitter :
Instagram :
Reddit :
Tumblr :
Youtube :

Desktop Wallpaper Photo
Miguel Á. Padriñán
Link –

Background Music Provided by NCS (Nocopyrightsounds)
Tobu – Life
Link-
Follow artist
Tobu

Follow NCS
Snapchat: ncsmusic
24/7 Radio:

How To Fix Your SDK location contains non ASCII characters | Android Studio

Просмотров: 58 763

Tea gal

But My Error Just Says:
ASCII
Open File. Can You Please Help.

Poziv u Dženet.

«You do not have sufficient privilege to perform this operation.»

Playernumber303 Roblox

Екатерина Игоревна

I had a problem. The name of the user was in Russian language. That’s why the program Android Studio didn’t see it. I created folders (Android and SDK) like this C:\Android\SDK. And then found this way in the program. And after it all the installation was successful.

Bruno. Soares

THANK YOU A LOT IT REALLY FIXED MY PROBLEM, THAAAAANK YOOOOOUUU .

Нефли

don’t help, what to do?

Força e Ação Telecom

You must create the \ AppData \ Local \ Android \ sdk folders first.

Eden Tanami

«You do not have sufficient privilege to peeform this operation», what to do?

João M. Evangelista

Thanks my friend!

Николай Криволап

Paldex İnc.

thank you very much bro , this video is beatifull :)

KEN CAT

Well, I just create folders which are same as that path, and it worked. But honestly, what on earth there still have one software does not accept nonASCII characters in 2020. Bullshit AS.

Понравилась статья? Поделиться с друзьями:
Все языки программирования для начинающих